OXYCHECK ANALYZER

Before diving with oxygen mix it’s important to verify with right precision the percentage of oxygen in the tank.

LM has the simplest  O₂ analyzer  available with microprocessor appreciated for its simplicity, its reliability and its technology.

OXYCHECK analyzer is what you need if you are a  nitrox diver and want to check yourself your gas mixture. 

OXYCHECK analyzer works thanks to his microprocessor specifically developed and designed to transform and put in numbers the signal of the electrochemical sensor readable on the LCD display,.

OXYCHECK analyzer is one of the simplest, more complete and sturdy analyzers of oxygen-enriched mixtures sold today in the international market. 

OXYCHECK analyzer can auto calibrate and auto diagnose on the 21% of oxygen; this helps to avoid the inaccuracy settings due to temperature, humidity or  to a run out probe… etc.

The instrument is supplied with in a little case with foam.

The analyzer is CE certified.

Characteristics

 Features

measurement range 0.1-100% O2

LCD display 67x43 mm. (2.63x1.70 in.) readable with every light condition

resolution 0.1% O2

reading accuracy +/-0.5%

auto calibration after 30" of turning on to 21% O2

BAT battery strength duration

Mv  sensor life indicator

use a 9V battery (not supplied)

battery and sensor user replaceable

Maintenance

The analyzer is not water resistant but the sensor must never get wet ; in case it happens  it can’t be used and needs to be replaced

Spare parts :

oxygen sensor

connector BC racket

Warranty

The instrument has a 24 months guarantee unless any kind of tamperings after it is delivered.