|
Blending
system to prepare Nitrox; blending in low
pressure and continuous flow makes of it a safe,
quick
and easy system.
With
this system no oxygen dedicated equipment is
requested. ( this means a good save of money
! )
The
system works with any brand and type of
compressors for breathing air and high pressure.
The
unit, positioned before the compressor, needs a
few minutes for the installation and nothing
has to be
modified if you need charging only air.
To
produce trimix two steps are necessary: first
charge heliair in the percentage needed and,
then, add
Nitrox.
The
system has the possibility to be upgraded to
the KING system and to blend in same time O2
and He
The
system is CEE certified
Features:
An
electronic sophisticated software controls, by
an exclusive LM’s microprocessor, the unit
Power
at low voltage 24v AC
Real
time reading of O2 charging
Possibility
to simulate a dive to find the Best Mix
Leds
of control of the opening of solenoid valves
Visual
and sound alarms
Pre
settled alarms for blends with low quantities of
O2
( 5%) and high
quantities O2
( 42%). It’s
possible to settle, under request of the
Customer, different values for the alarms
Possibility
to settle the control of the % of O2 and He
during the charging
Medical
long lasting sensors ( about 2 years) and of
high precision
The
life of sensor shown on the display
Cut
off the flow of gas at the end of recharging
Blending
unit has the size of approx a “shoe box” and
weights only 6
Kilos
The
Kit includes:
Box in
stainless steel 316 with blender and O2
solenoid valve, an electronic panel, a O2
pressure reducer, pipes and clamps,
use and maintenance manual, a cd Best Mix
to help you prepare Nitrox and Trimix
blends.
Spare parts:
Electronic panel, oxygen sensor, O2
and He pressure reducers, rapid clutch.
Maintenance:
The
system must be protected from rain, sand, sun
not to damage the electronic elements
Warranty:
The
blender has a life time guarantee, the other
parts have a 24 months international guarantee
|
